Enable zoom. Add page 2 to Favourites. E-1 Read this first! For General indicates safety information. CAUTION: In order to maintain adequate ventilation, do not install or place this unit in a bookcase, built-in cabinet or any other confined space.
To prevent risk of electric shock or fire hazard due to overheating, ensure that curtains and any other materials do not obstruct the ventilation. Note: The rating plate is on the underside of the unit. To reduce the risk of electric shock, do not remove the covers.
No user serviceable parts inside. Refer servicing to qualified service personnel. Add page 3 to Favourites. Continued For USA indicates safety information. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning: To assure continued FCC emission limit compliance, the user must use only shielded interface cables when connecting to external units. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance service instructions in the literature accompanying the appliance.
Add page 4 to Favourites. E-3 Table of Contents Read this first! Add page 5 to Favourites. The unit controls the camera recorder from the controller and is capable of changing numerical values in the menu. Coverage can be extended by 50m by using the dedicated cable. This button has the same function as the USER2 switch on the camera recorder. Functions assigned to the USER2 button are selected in the menu of the camera recorder or the unit.
When the power is turned on, the unit is in the state it was before turning off the power. For the single filter, filter switching is disabled. This button switches the output from the camera recorder between the color bar and the camera signals.
When the output from the camera recorder is the color bar, the lamp is on; otherwise, it is off. This displays the image gain of the camera recorder. When this button is pressed, the image gain of the camera recorder is increased.
The lamp is on during AWB operation and off when the operation is completed correctly. If AWB operation finishes incorrectly, the lamp will flash for 5 seconds and then turn off. The lamp is on during ABB operation and off when the operation is completed correctly. If the ABB operation finishes incorrectly, the lamp will flash for 5 seconds and then turn off.
Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. AJ- G Before operating this product, please read the instructions carefully and save this manual for future use.
Read this first! Continued For USA. Warning: To assure continued FCC emission limit compliance, the user must use only shielded interface cables when connecting to external units. Menu item Features z For some frequently functions on the camera unit, dedicated switches are provided for direct operation.
Accessories Connection cable 10 m. After turning on the camera recorder power, turn the unit power on. Parts and functions Front panel Panel part! When the power is on, the unit is on. In recorder mode: This button is operated in the same way as the REW button on the camera recorder, and the lamp is on when a tape is rewinding. In the scene file mode: 1 is selected as the number for the scene file to be saved or loaded. Overview View all the pages Comments. Page 1.
E-1 Read this first! For General indicates safety information. Continued For USA indicates safety information.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the E-3 Table of Contents Read this first! The unit controls the camera recorder from the controller and is capable of changing numerical values in the menu. Coverage can be extended by 50m by using the dedicated cable.
0コメント